MARINE HARDWARE CATALOG
To Navigate, use links on left...
 
More Miscellaneous Equipment 

Click on images for larger view...

Snubbers | Extendible Rescue Pole | Spinnaker Peeling Strops | Snap Hook and Ring System | Boom Vangs and Preventers | Inner Forestay Systems | Lazyjack Systems | Sail Chafe Protector |
 Return to Marine Hardware Catalog

snubber.gif (116767 bytes)
Click on image for larger view

Snubbers

 For quick and easy snubbing of anchors, chain, slings or rope loops.  Can also be used as a quick release tie down.  Two stainless steel snap shackles or a shackle and a U-Bolt on a nico-pressed Cable.

extendiblerescuepole.gif (161270 bytes)
Click on image for larger view

Extendible Rescue Pole

 A choice of an 8' or a 12' collapsible aluminum pole with a clip attached to it that holds our 2454 double action safety hook in the open position until hooked onto a ring, loop or mooring line.  Then one easy pull on the pole closed the safety hook and separates it from the pole.  Tether not included.

Spinnaker Peeling Strops

 peeling strop.jpg (114919 bytes)
                                                            

 

 Our new trigger release snap shackles joined at their bales make excellent connecting strops for temporarily holding the guy during a running spinnaker change or "peel".

Forged from 17.4ph stainless steel, the strops will easily stand up to the dynamic loads expected on a peel.  We have carefully joined the bales to prevent any loss of strength to the snap shackles and of of course they are polished and passivated to our legendary standard.

Care should be taken when deciding on size. Type of boat and rig should be taken into consideration.  When in doubt as to size you need, please call 800-852-7084 for technical advice.

 

Part Number                          Functional Load                      Break Load

SP2653  

4000lbs  

 8000lbs

SP2655

6388lbs

 11000lbs

SP2657

11440lbs  

 17600lbs

Pre-made slings and Web accessories

wpe1D.jpg (13597 bytes)

 Webbing slings: For dinghy tie downs, or lifting and storing small, canoes
or ski boxes, our web slings with stitched in stainless rings or galvanized quick links makes the job easy

Part#

 Length(inches)  Hardware

Funct
Load

 Break
 Load
SP6732 30,48,60,72 6732 triangle 3000 5000
SP0000 30,48,60,72 none 3000

5000
SPD8GS 30,48,60,72 D-080-GS 3000 5000
snaphookandringsystem.gif (170490 bytes)

Snap Hook and Ring System

 We have captured our NA885 forged stainless steel ring onto a Wichard 2325 snap hook to create an excellent connecting system for webbings up to one and one half inches.  A second NA885 completes the system and provided over 2600 lbs. of safe working load.
forestay01.gif (27869 bytes) forestay02.gif (25930 bytes)

Inner Forestay Systems

 These systems are designed for easy set up and removal of an inner forestay to rig a storm sail or a stays'1 quickly when the weather suddenly turns bad.  Just select an adjuster for quick tensioning the stay, pick a folding padeye for deck connection and our stowage clip to hold the stay out of the way when not in use.

forestay03.gif (51762 bytes)
Click on image for larger view
Adjuster 5554 5556 5556 5585 5587 5588
Padeye 6504 6505 6564 6565 6566 6566
Backing Plate SP6504 SP6505 9204 9205 9205 9205
Stow Clip SP8855 SP8855 SP8855 SP8855 SP8855 SP8855
Receiver Padeye 6584 6505 6505 6505 6505 6505
lazyjack01.gif (111213 bytes)

lazyjack02.gif (54482 bytes)
Click on images for larger view

 lazyjack03.gif (169369 bytes)

Lazyjack Systems

 Our unique lazyjack system is designed to contain and restrain the mainsail while reefing and furling.  The system is attached to mast and boom by Wichard snap hooks so it can be completely removed from the boat or moved outboard to the life lines while racing.  We've also made the Wichard lazyjacks strong enough to be used as a topping lift for boats with extreme roached mainsails.  The lazyjack kits come complete with hardware, rope, fasteners and installation directions.
Item Number Boat Length Boom Length
SP875 24' to 32' 9'-12'
SP876 33' to 42' 12' to 16'
boomvang1.gif (89365 bytes)

Boom Vangs and Preventers

Vangs are used primarily to hold the boom down and to provide greater mains'1 trim flexibility in strong winds.  They are also useful in preventing an accidental <<flying gybe>> which can be dangerous to the boat and the crew.
We have created four Vang/Preventers to fit all boats from dinghies to large racer cruisers.  The small, medium, and large sizes feature our forged snap shackle blocks for quick attachment to boom and deck or rail.  The mini version comes with our forged D shackles.

boomvang.gif (68620 bytes)

Item Number

Purchase

Max Boat Size

Line Dia & Length

SWL

SP871

3:1

Up to 25'

5/16" X 20'

1100

SP872

4:1

Up to 25'

3/8" X 30'

1500

SP873

4:1

Up to 35'

3/8' X 40'

2200

SP874

4:1

Up to 40'

3/8" X 60'

3500

Sail Chafe Protector

 Sail chafe protector.gif (89638 bytes)
Part Number Wire Size  
4107 1/4" to 3/8" The hole will need to be drilled out on wire larger than 1/4"